Montana climate project to install remote weather stations

0 Comments

MISSOULA, Mont. (AP) — University of Montana researchers recently received a $21 million government contract, bringing more support and longevity to what has been a grassroots effort to build a better climate monitoring network across the state.

The funding from the U.S. Army Corps of Engineers will pay to expand and enhance a collaborative project spearheaded by UM’s Montana Climate Office in 2016 that aims to fill in gaps in weather and soil moisture data throughout the state.

“This project is very unique,” said Kelsey Jencso, a lead researcher and associate professor of watershed hydrology at UM. “This is a very applied project. It has a particular goal, which is to better monitor soil moisture, snowpack, weather hazards and climate conditions.”

Through partnerships with government agencies, including the Montana Department of Agriculture and Bureau of Land Management, Montana State University, watershed groups, and private farmers and ranchers, the Montana Climate Office, part of the W.A. Franke College of Forestry and Conservation, has installed 80 weather stations in the last four years across Montana.

Called Montana Mesonet, the project allows researchers and state agencies to better characterize drought conditions across Montana for planning around agriculture, water supplies and evolving fire conditions, Jencso said in a phone interview. With the additional money from the contract, they’ll be able to add stations in central and eastern portions of the state, where historically, data has been under measured.

“It’s not that snow doesn’t occur out in central and eastern Montana, it’s just that we don’t have stations to record that and so these data points become really important for daily models by the NOAA (National Oceanic and Atmospheric Administration) and Weather Service flood forecast center,” Jencso told the Missoulian.


The $21 million Army Corps contract will cover new equipment and sensors and pay for

Solar-Powered EV Chargers Go Where Grid-Tied Stations Can’t

0 Comments

While you can build a gas station pretty much anywhere zoning codes allow, electric vehicle fast-charging stations need to be placed in close proximity to dedicated service transformers to support their heavy draw from the grid. Access to that type of infrastructure isn’t always available in rural areas, which means that large swaths of California have few public charging stations, if there are any at all. Electrify America is filling in the service gaps with off-grid electric vehicle charging stations powered only by the sun.

The national EV charging network announced today it added eight solar-powered charging stations in under-served areas in California. EV ARC stations are freestanding Level 2 chargers that don’t need to be tied to the power grid to work. Rather, they’re equipped with a 4.28-kilowatt (kW) sun-tracking solar array and 32kWh of on-board battery storage. They generate 100% of its stored electricity from its solar panels and can operate even at night or during power outages to charge two vehicles simultaneously at a speed of 3.3 kw.

“In rural areas of California there isn’t always the infrastructure available for charging stations,” explains Nina Huesgen, senior manager at Electrify America. “Providing this access to charging can increase the confidence of local EV drivers in need of public charging options.”

Although 8% of new vehicle sales in California were EVs in 2019, rural areas have only half a percent of penetration, according to Envision Solar, which manufactures the EV ARC stations.

Electrify America is positioning eight solar powered stations in easily-accessible public locations in Fresno County with plans to install 30 in rural and economically disadvantaged areas of California by the end of 2020. These stations are free and open to the public, and are meant for “opportunity

HP Notebook Docking Stations and Everything About Them

0 Comments

HP is a globally reputable company which manufactures excellent computer products and the latest innovations. When it comes to computer technology, they always lead, and the notebook docking station is one of their most prized product lines. But what is there to admire about HP docking devices?

Notebooks, albeit functional, have a lot of lacking features which can only be found in desktops. But with a docking device, a laptop can turn into a desktop-like system, mimicking its functionality and connectivity options. This makes laptop computing not only more accessible to computer peripherals, but comfortable as well.

Sometimes, a laptop user just wants to gain access to a real keyboard and mouse. If you’re that person, you might want to get the HP AK155AA Mobile Port Replicator. It has two USB 2.0 ports and two PS2 ports where you can connect a keyboard and mouse, and it is compatible to most models of HP and Compaq laptops.

Some laptop users want additional ports only, as well as complete connectivity options. The HP ES631AA Notebook QuickDock has all the necessary ports, inlets, and connectors that you need to access all computer peripherals. The device has six USB 2.0 ports, Ethernet port, VGA port, S-Video out port, Audio in and out, and a composite and component video out ports. It is compatible with most HP Presario and Pavilion laptops.

There are some docking stations which provide a real desktop feel to the laptop user. The HP PR1010 docking station is one of these. You actually place the laptop on the dock, maintaining it on an elevated position, and you can attach a mouse and keyboard for easier use. It’s like you’re working on the desktop, and even the ports are complete. The PR1010 has six USB 2.0 ports, audio in and out, …